¶ Charge Amps Halo OCPP setup
Get charger Serial number.
Get charger pin code.
Connect charger to power.
When charger powers on it will create a WIFI network (Halo_XXXXXXM). This not work is only available for couple of minutes. The password will be the charger pin code.
When connected open browser and go to http://192.168.250.1
Enter your desired WIFI in SSID input field. And password in the password field.
Afterwards send an email to Charge Amps Support <support@charge-amps.com> with the following body,
Can you change {CHARGER SERIAL NUMBER} to use OCPP settings below.
- Url: ws://ocpp.softcontrol.dk/ocpp/
- Port: 80
- Protocol: ws:// (WebSocket)) OCPP1.6J
- Identifier: {CHARGER SERIAL NUMBER}
After they change the settings it should come online in CleverHouse